Description
Grade: 1060 pure aluminum, one-side blue PVC, fast lead time within 5 days.
Core Parameters: Al content ≥99.6%, density 2.68 g/cm³, tensile strength 110-136 MPa, elongation rate 3%-5%, hardness about 26 (Vickers hardness 30HB).
Aluminum (Al) ≥99.6%, with main impurities including iron (Fe≤0.35%), silicon (Si≤0.25%), copper (Cu≤0.05%), etc. The low alloy composition makes it a representative of pure aluminum, suitable for scenarios requiring high electrical conductivity and corrosion resistance.
Density: 2.68-2.71 g/cm³ (slightly different from sources).
Electrical Conductivity: Second only to silver and copper, suitable for the electrical field.
Tensile Strength: 110-136 MPa (national standard).
Yield Strength: ≥35 MPa (some references indicate above 75 MPa).
Elongation Rate: 3%-5%, indicating excellent plastic processing properties, suitable for stamping, drawing, and other processes.
Hardness: About 26 (Vickers hardness 30HB), due to the soft nature of pure aluminum.
Heat Treatment: Rapid annealing temperature 350-410°C, holding time 30-120 minutes.
National Standard Basis: Follows GB/T 3880-2012, but hardness is not clearly indicated (only standards exist for high-strength alloys such as 7075).
Advertising billboards, architectural decoration, chemical instruments, etc., where high strength requirements are not critical.
Electrical components (such as cables) benefit from its high electrical conductivity.